Stihl FS 560 C Manual De Instrucciones página 20

English
Metal cutting attachments
6 Grass cutting blade 255-8
(255 mm dia.)
7 Brush knife 350-3
(350 mm dia.)
8 Scratcher tooth circular saw blade
225
(225 mm dia.)
9 Chisel tooth circular saw blade 225
(225 mm dia.)
WARNING
Non-metal grass cutting blades, brush
knives and circular saw blades are not
approved.
Deflectors, Limit Stop
10 Deflector for mowing heads
11 Deflector for metal cutting
attachments, items 6 and 7
12 Limit stop for circular saw blades
Harness
13 Full harness must be used
WARNING
Based on the cutting attachment being
used:
Choose the proper deflector in order to
reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
18
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of injury from loss of
control and contact with the cutting
attachment.
Use grass cutting metal blades, brush
knifes and circular saw blades on this
unit only if equipped with a bike handle.
Do not use rigid polymer blades on this
unit.
Mounting the Bike Handle
Mounting Bike Handle with Swiveling
Handle Support
1
Do not rotate the control handle (1)
between unpacking and mounting it on
the handlebar; see also chapter on
"Adjusting the Throttle Cable".
The brushcutter is available with two
different handlebars:
2
4
2 Handlebar for machines used
primarily for mowing and
brushcutting, but also for occasional
sawing.
FS 510 C, FS 560 C