Epson Home Cinema 2350 Manual De Usuario página 17

Projector Placement
Advertencia
• Do not cover the projector's air intake or air exhaust vents. If the vents are
covered, the internal temperature could rise and cause a fire.
• Do not use or store the projector in locations where it will be subject to dust or
dirt. Otherwise, the quality of the projected image may decline, or the air filter
may become clogged, resulting in a malfunction or fire.
• Do not install the projector on an unstable surface or in a location beyond the
weight specifications of the projector. Otherwise, it could fall or topple causing
an accident and injury.
• When installing the projector in a high position, take measures to prevent falling
by using wires to ensure safety in an emergency, such as an earthquake, and to
prevent accidents. If it is not installed correctly, it could fall causing an accident
and injury.
• Do not install in locations where salt damage could occur, or in locations subject
to corrosive gas such as sulphuric gas from hot springs. Otherwise, corrosion
could cause the projector to fall. It could also cause the projector to malfunction.
Atención
• Make sure you do not operate the projector in the following positions. These
may cause the projector to malfunction.
• Do not operate the projector on its side.
• Do not project images upward or downward.
• Do not tilt the projector right or left.
• If you are using the projector at altitudes above 1,500 m, set the High Altitude
Mode setting to On in the projector's menu to ensure the projector's internal
temperature is regulated properly.
s Extendida > Operación > Modo alta altitud
• Try not to setup the projector in locations subject to high humidity and dust, or
in locations subject to smoke from fires or tobacco smoke.
g g Enlaces relacionados
• "Precauciones relacionadas con la instalación"
• "Opciones de configuración e instalación del proyector"
• "Distancia de proyección" p.18
• "Forma de la imagen" p.36
• "Projector Setup Settings - Extended Menu"
p.17
p.17
p.74
Precauciones relacionadas con la instalación
Tenga en cuenta las siguientes precauciones al instalar el proyector.
Espacio de instalación
Atención
• Asegúrese de dejar la siguiente cantidad de espacio alrededor del proyector para
no bloquear las ventilaciones de salida y entrada de aire.
• No instale el proyector en un lugar que no permita la circulación del aire, como
puede ser una estantería o dentro una caja.
10 cm
20 cm
B
30 cm
C
Opciones de configuración e instalación del
proyector
Puede configurar o instalar el proyector de las siguientes formas:
17