Epson Home Cinema 2350 Manual De Usuario página 93

Adjusting the Color Convergence (Panel Alignment)
h
Use the arrow buttons on the remote control to adjust the color
alignment selected in Select Color, and then press [Enter].
Adjustment affects the grid lines in the entire screen.
a
i
Select one of the following options:
• Select Adjust the four corners to fine-tune your adjustments.
• Select Exit to finish adjustments.
j
Use the arrow buttons on the remote control to adjust the color
alignment of the screen corner highlighted by the orange box, and then
press [Enter].
k
When you are finished adjusting each corner of the screen, press
[Enter].
l
Select one of the following options:
• If your projector needs additional panel alignment, select Select
intersection and adjust. Use the arrow buttons on the remote
control to highlight the corner of any misaligned box on the screen,
press [Enter], make any necessary adjustments, and then press
[Enter] again. Repeat this step as necessary for the other
intersections.
• Select Exit to finish adjustments.
m
If you want to save the color convergence in the projected image you
have adjusted, select Memory > Save Memory.
93