golmar Stadio Plus Manual De Instalación página 56

DOOR PANEL PROGRAMMING
Coming from previous page
*
call to exchange
yes
*
autoswitch-on
yes
*
direct call code
yes
set time
16:24
modify value
16:24
1 7 3 0
set time
17:30
display clock
yes
C
onfiguration menu.
If the option YES is selected, the calls made
on the door panel will be transferred to the
porter's exchange (if exists) in a first attempt.
To enable this function, the porter's exchange
must enable its capture panel function.
Press OK to change this value.
Allows to establish video and/or audio
communication without a previous call.
In buildings with several panels, this function
can be activated in one of them only;
in systems with general entrance panel,
this function can be activated in the
internal building door panels only.
Press OK to change this value.
Allows the activation of a second call code for
each apartment, that can be different to the
programmed call code. This code must be
assigned on the repertory menu (page 113).
Press OK to disable or enable this feature.
The system has an internal clock that allows
to show the time on the door panel display
when the system is on stand-by position.
This feature can be disabled on the following
step and on the user menu.
O.K. An internal battery keep the system on time
even if the power supply is disconnected
during a long period of time.
To set the time press OK: the display will show
the message . Key in
modify value
the hour value from 0 to 23 and minutes
O.K.
value from 0 to 59 and confirm by pressing
OK. If CANCEL is pressed the former value
will be restored.
Allows to show or to hide the display clock
when the system is on stand-by position.
Press OK to change this value.
Continue
108 109
Coming from previous page
display mESsAgE
golmar
display mESsAgE
golmar
installer pin
modify value
9
installer pin
user pin
modify value
5
user pin
DOOR PANEL PROGRAMMING
The door panel display shows this message
when the system is on stand-by position.
Use this text to show i.e. the building name
or address.
To change this message press OK and proceed
O.K. as described on page 116.
Once the modification has been done the
display will show the message
settings recorded
to the initial screen.
Allows to change the installer PIN code to enter
into the installer programming menu
:1315
(page 106).
Do not let know this code to untrained
people; any change on the programming
O.K. menu could produce a system failure.
To change the PIN code press OK: the display
:1315
will show the message
Key in the new code and confirm by pressing
8 7 6
OK. If CANCEL is pressed the former value
will be restored.
O.K.
Always use a four digits code.
:9876
Allows to change the user PIN code to enter
into the user programming menu (page 106).
:1111
Any change on this menu will not affect
the system operation.
O.K. To change the PIN code press OK: the display
will show the message
Key in the new code and confirm by pressing
:1111
OK. If CANCEL is pressed the former value
will be restored.
4 3 2
Always use a four digits code.
O.K.
:5432
C
onfiguration menu.
, and will return
.
modify value
.
modify value
Continue