Wall-Mounted - Zhermack ELITE MIX Manual Del Usuario

MAINTENANCE AND USE MANUAL
The elite mix has been designed to be wall-mounted. For fast, accurate drilling of the holes use the
supplied drilling template; check carefully for proper horizontal alignment of the holes. Once
drilling is over, introduce the plugs in the holes and then screw in the screws but not all the way:
let them protrude from the wall by 8-10 mm.
Check that the machine is stable before using it.

WALL-MOUNTED

The elite mix vacuum mixer has also been
designed for use on a rigid, flat surface
parallel to the ground with the aid of a stand
(optional accessory).
To this end both general furniture (which allow
the mixer to be used standing up) and modelling
benches (which allow the mixer to be used sitting
down) may be used, but always check for proper
stability first.
ELite mix
EN
If mounting the machine on a
plasterboard wall use specific
plugs.
Pre-use installation
WORKBENCH
115 of 264
6.3.1