Identification Data - Zhermack ELITE MIX Manual Del Usuario

MAINTENANCE AND USE MANUAL
The machine described in this manual has an ID platelet giving information about both the machine
and the manufacturer:
A
Zhermack S.p.A. - via Bovazecchino, 100
45021 Badia Polesine (RO) Italy - Tel. +39 0425 597 611
B
D
230V~50/60Hz 150W 450 min
A. Name and address of manufacturer
B. Machine code and model
C. Serial number
D. Power supply information
The machines has been built in compliance with the EC directives listed in the enclosed "EC
declaration of conformity". When requesting spare parts, information or assistance from your
Authorised Servicing Centre always quote the data on the ID plate.
Should the ID plate deteriorate and become illegible, even partially, order a replacement plate from
the manufacturer: remember to quote the relevant data.
Do not remove and/or damage the plate as you must be able to read the data at all
times.
The following symbols are applied on the machine:
ATTENZIONE! DANGER OF AN ELECTRICAL
CURRENT. DO NOT OPEN DOORS OR REMOVE PROTECTION BEFORE YOU HAVE
DISCONNECTED THE PLUG FROM THE ELECTRICAL SOURCE.
A proper earth connection is compulsory. Should it temporarily be necessary to use an
extension lead the latter must comply with the standards in force in the country of use.
ELite mix
EN
C305120 - elite mix 230V
SN:20000000
-1

IDENTIFICATION DATA

A
Zhermack S.p.A. - via Bovazecchino, 100
45021 Badia Polesine (RO) Italy - Tel. +39 0425 597 611
B
C305125 - elite mix 115
C
D
115V~60Hz 150W 450 min
On-machine labels and symbols
SN:20000000
-1
109 of 264
3.3
C
3.3.1