Dreame DreameBot L10S Ultra Manual De Usuario página 17

How to Use
Sweeping & Mopping
Note: When using the mop assembly for the first time, the robot performs the sweeping and mopping task by default.
1. Start sweeping and mopping
Press the button on the base station or
to make the robot start from the base station. Then the robot will plan the
optimal cleaning route and perform the cleaning task based on the created
map.
Note:
·
The mop pads will be cleaned before the robot starts mopping, please wait with
patience.
·
Do not move the base station, the clean water tank, the used water tank, or the
washboard during its working.
on the robot, or use the app
2. Return to clean mop pads midway
During mopping, the robot will automatically return to the base station to
wash mop pads based on the mop pad cleaning frequency specified on the
app. Then the base station will automatically refill the water tank of the robot,
and the robot will resume the cleanup after water refilling.
Note: If the robot returns to the base station to clean mop pads midway, the base
station will not automatically empty the dust bin.
EN
15