Dreame H12 Manual Del Usuario página 7

Charging
EN
Note: Fully charge the vacuum before first use.
1. Place the charging base on the level ground against a wall. Connect one end of the
power adapter to the charging base and another end to a power outlet.
2. Place the vacuum on the charging base, the
the charging status. The number on the display screen represents the current battery
level as a percentage during charging. When the number is at 100, the battery is fully
charged and the will turn off. If no operation is performed within 10 seconds, the
screen will turn off automatically.
Note: If there is no operation within 15 minutes of being fully charged, the vacuum will enter sleep
mode.
9
on the screen will light up to indicate
How to Use
Filling the Clean Water Tank
1. Press the clean water tank release
button and pull the tank outwards to
remove it.
2
1
3. Close the tank cover tightly.
2. Remove the cover of the clean water
tank and fill the tank with clean water.
4. Install the clean water tank and ensure
it clicks into place.
2
2
1
咔哒
Click
1
EN
10