Dreame H12 Manual Del Usuario página 9

Care & Maintenance
EN
Cleaning the Brush Roller Cover
* Clean it as needed.
1. Press the brush roller cover release
buttons at both ends inward to remove
the cover
3. Dry the cover completely before use.
13
2. Rinse the cover with clean water or
wipe it with a cloth.
4. Re-install the cover back.
Care & Maintenance
Cleaning the Brush Roller
* Clean it as needed. Replacing every 3 to 6 months is recommended.
1. Press the brush roller release button,
and the brush roller handle pops out.
Pull it to take out the brush roller.
1
2
3. Wipe the suction inlet with a dry cloth
or wet tissue. Do not rinse the brush
assembly with water.
2. Clean out any hair and debris
tangled on the brush roller with the
provided cleaning brush. Rinse the
brush roller with clean water and dry it
completely.
4. After cleaning the brush roller , align
and push the right end into the right slot
on the brush assembly and press the
brush roller handle into the left slot on
the brush assembly.
1
2
EN
14