Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly
Assembly procedure
1. Install the four wheels on the base.
2.1. Install the gas cylinder brackets A and B to the base with
four M6X12 hex screws.
2.2. Use one M6X12 hex bolt and one M6 hex flange nut be-
tween the two gas cylinder holders and then tighten the
bolts.
Material needed
x 5
AA
EE
x 1
3. Install the left and right side plates to the chassis with four
M6X12 hex screws.
Note that the side plate that does not suction is the left side,
which is installed on the side with the front door hole, and
the right side plate that does suction is installed on the other
side).
Material needed
AA
x 4
1
2
K
L
3
O
Front door
pivot socket
23
English
S
R
AA
EE
I
Door
stopper
AA
infiniton.es
Publicidad
