Cleaning & Maintenance
Troubleshooting
Whenever there is a problem with the appliance, check if you can solve it by following the tables below. If
the problem persists, contact customer service.
DESCRIPTION
Burner does not light
Cleaning and maintenance
•
Clean dusty surfaces with a soft, damp cloth. Do not clean the heater with combustible or corrosive
cleaning agents.
•
Remove debris from the burner to keep it clean and safe for use.
•
Cover the burner unit with the optional protective cover when the heater is not in use.
POSSIBLE CAUSE
Low pressure
Opening blocked
Control not connected
Thermocouple defective
Pilot assembly damaged
Incorrect location.
31
SOLUTION
Tank almost empty. Refill LPG tank.
Remove and clean
Turn valve to ON position
Replace thermocouple
Fit pilot correctly
Fit correctly and try again
English
infiniton.es