15. Maintenance plan
Always comply with the following maintenance intervals in order to ensure problem-free operation.
ATTENTION! At initial start-up, engine oil and fuel must be filled.
every use
Checking the
engine oil
Changing the
engine oil
Checking the air
filter
Cleaning the air
filter
Visual inspection of
the device
Cleaning the spark
plug
Check and readjust
the throttle valve
Cleaning the
cylinder head
Adjust the valve
play
Attention: Only have points "X*" carried out by an authorised specialist company.
Before
after operating for 20
hours
X
first time, then every
50 hours
X
X
www.scheppach.com
after operating for 50
hours
X
Change filter insert if
necessary
X
Gap: 0.6 - 0.7 mm,
replace if necessary
after operating for 300
hours
X*
X*
X*
GB | 39