Sirona Dental SIROLaser Instrucciones De Uso página 96

4 Installation
5 .
5 .
4.
Figure 20: Handling the fiber cutter
28
Cutting fibers
4. Place the fiber in the fiber cutter at the notched mark.
5. Press the fiber cutter together.
6. Bend the fiber at the notched location.
The fiber breaks at the notched location with a smooth, perpendicular
fracture surface.
Check to see if the light of the aiming beam projects a uniform circular
pattern. To do this, aim the probe tip vertically at a white background
located approx. 20 cm away. If the probe projects no pattern at all or only
an uneven pattern, cut off another one to two millimeters.
6 .
60 56 092 D 3485
D 3485.201.01.10.02 03.2008