Silvercrest 406569 2207 Instrucciones De Uso página 12

1) After setting the desired browning level, insert the bread into the toaster
slots 7.
2) Press the operating button 8 downwards.
3) Press the button "Defrosting"
4) When the defrosting and toasting process is finished, the toaster switches itself
off automatically, the control lamp integrated in the button "Defrosting"
goes out and the bread slices are ejected to the top.
NOTICE
► Press the "Defrost" button
The integrated control lamp goes out and the defrost process switches to
a normal toasting process.
► To stop the toasting process completely, press the "Stop" button
The toaster switches itself off and the bread slices are ejected upwards.
Crisping bread rolls
Never lay bread rolls directly onto the toaster, always use the bread roll rack 6.
1) Fold out the two feet of the bread roll rack 6.
2) Place the bread roll rack 6 onto the appliance so that the feet protrude into
the toasting slots 7 and the bar between the toasting slots 7 fits into the
arched sections on the feet. In this position, the bread roll rack 6 sits on the
appliance stably.
3) Place the bread rolls onto the rack and start the toasting procedure. Set the
toasting dial 2 to the desired browning level. We recommend setting the
browning level to 1, but the setting may vary depending on the bread type
and personal taste.
NOTICE
► After toasting, the rolls will be very hot.
4) As soon as the toaster switches itself off, turn the rolls over to crisp the other
side and then switch the toaster back on.
5) When you are finished with the bread roll rack 6, you can fold it for
space-saving storage:
–
Wait until the bread roll rack 6 has cooled down.
–
Remove it from the appliance.
–
Fold the feet of the bread roll rack 6 back in.
STEC 920 A1
5. The integrated control lamp glows.
5 again to switch off the defrost function.
5
3.
GB │ IE │
9 ■