Publicidad
Idiomas disponibles
Idiomas disponibles
Figure 15
2.
Make sure to properly close the container's lid.
3.
For airtight containers with a button that has a "sealed" setting, set the button to the
"sealed" position.
•
"Normal" mode is selected by default. You can choose a slower or faster speed by
pressing the
button. The light for the selected speed turns on. "Delicate"
represents a slower speed and "Normal" a faster speed.
4.
Press the
button to begin removing air (Figure 16). The light on the
turns on and the motor starts to run.
5.
Once air in the container has been removed, the appliance automatically stops and the
light on the
button turns off.
•
Once the vacuum packing process is complete, set the button on the top of the airtight
container to the "closed" position (sealed). You can then remove the hose. The airtight
container is ready for storage.
•
Note: At any time, you can press the "Vacuum pack & seal/Cancel" button to stop the
process.
22
button
Figure 16
Marinating
•
Your vacuum sealer has a "marinate" function, which takes about 10 minutes. The
process is faster because vacuum packing opens the pores in the food, making it absorb
flavours more quickly. Marinating is an hours-long process without a vacuum sealer.
•
The motor keeps air out for several minutes then releases it and allows the food to rest
briefly. The process repeats twice in a row, marinating the food faster.
Marinating with a vacuum bag
•
You can use the "Marinate" function with vacuum bags. For this, refer to the section
"Vacuum packing using vacuum seal bags". At step 5, press the
appliance run. The process takes about 10 minutes.
Marinating with an airtight container (not included)
1.
Fill your airtight container with your marinade, making sure to leave a 2-3 cm gap
between the contents and the lid.
2.
Connect one end of the accessory hose to the connector located on the right-hand side
of the appliance and the other end to the specially-designed lid of the airtight container
(Figure 14).
Figure 14
3.
Make sure the container's lid is closed securely and that the hose is properly connected
to the airtight container. For airtight containers with a button that has a "sealed" setting,
set the button to the "sealed" position.
•
"Normal" mode is selected by default. You can choose a slower or faster speed by
pressing the
button. The light for the selected speed turns on. "Delicate"
represents a slower speed and "Normal" a faster speed.
4.
Press the
button. The light on the
takes about 10 minutes.
button. Let the
button blinks during the process, which
23
Publicidad
