WIKA CTD9100-165 Manual De Instrucciones página 24

Temperature Dry Well Calibrators/Micro Calibration Baths
CTD9100/CTB9100
Press the 5 key to increase the duration time

GB
dur.t.
Press the  key to decrease the duration time

dur.t.
Press the 5 and  key to raise and
lower the value by 0.1 respectively.
If the keys are held pressed for at
least one second, the value increases
or decreases quickly and after two
seconds even more quickly; this
means the desired value can be
reached rapidly.
Press the P key to confirm the set duration time

dur.t.
The display returns to the parameter level.
24 WIKA Operating Instructions Temperature Dry Well Calibrators/Micro Calibration Baths
If no key is pressed for approx. 15
seconds, the device automatically
returns to a previous level up to the
calibration mode.
After carrying out the settings, the
calibrator/micro calibration bath uses
the new values only when modifying
the set temperature or switching the
calibrator/micro calibration bath off
and on again.