Descargar Imprimir esta página

Grizzly Tools ARM 2040-33 Lion Set Traduccion Del Manual De Instrucciones Originale página 28

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 122
GB
Attention: Do not operate the ap-
pliance until the collision guard
and grass box are fully installed.
Risk of injury!
Insert/remove battery
Switch off the device, remove the
safety key (
blade to come to a stop. There is a
risk of personal injury.
1. To insert the battery (7) into the de-
vice, push the battery along the guide
rail into the device. It locks into place
audibly.
2. To remove the battery (7) from the de-
vice, press the release button (
on the battery and pull the battery out.
Mulch kit
Attaching the mulch kit
1. Remove the grass collection box, if
used.
2. Lift the impact protection.
3. Slide the mulch kit (19) into place. The
bracket (19a) snaps into place.
Removing the mulch kit
4. Push in the bracket (19a) on the mulch
kit and remove the mulch kit (19).
Initial Operation
Before operating the machine,you must
- install the upper and lower upper han-
dles:
- install the collection bag
Caution! Risk of injury! During
the assembly or disassembly of
the collection bag, the engine
must be turned off and all mov-
ing parts must have come to a
28
21) and wait for the
7b)
standstill. Remove the battery
from the device before carrying
out any work.
Operation
Caution! Risk of injury! Always
wear appropriate protective
equipment and work gloves
while working with the appli-
ance. Prior to each use, ensure
that the appliance is working
correctly. Ensure that the col-
lection bag is installed correctly
and the device has been mount-
ed properly. Do not use the
device if a switch is damaged.
Personal protective equipment
and a fully functional appliance
reduce the risk of injuries and
accidents.
Adjustments on the mower, as
well as assembly and disas-
sembly of the collection basket,
mulch kit and lateral ejection
chute, etc. may only be made
while the motor is switched off
and the blades are at a standstill.
Switch off the device, remove the
safety key (
blade to come to a stop. There is a
risk of personal injury.
Observe noise control and local
regulations.
Mounting/removing the
grass box
1. To mount the grass catch box (13) lift
the impact protection (14) and mount
the grass catcher box (13).
21) and wait for the

Publicidad

loading