Publicidad
Idiomas disponibles
Idiomas disponibles
GB
main vegetation period, the lawn is to be
mowed at least once a week.
•
Run the equipment at a walking pace,
in tracks that are as even as possi-
ble. For gap-free mowing, the tracks
should always overlap by a few centi-
metres.
•
Adjust the cut height so the equipment
is not overloaded. Otherwise, the mo-
tor may be damaged.
•
On slopes, always work across the
slope. Take particular care when going
backwards and pulling the equipment.
•
Clean the equipment after each use,
as described in the chapter on "Clean-
ing, Maintenance and Storage".
Switch off the equipment after
work and in order to transport
it, disconnect the plug and wait
until the blade stops. There is a
risk of injury.
Cleaning, Maintenance
and Storage
Have work that is not described
in these instructions carried out
by a customer service centre
that we have authorised. Use
only original parts.
Wear gloves when handling the
blade.
Before any maintenance or clean-
ing work, switch off the device,
remove the safety key (
and wait for the blade to come to
a standstill. There is a risk of per-
sonal injury.
30
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
General Cleaning and
Maintenance Work
•
Always keep the equipment clean. To
clean, use a brush or cloth but no de-
tergent or solvent.
•
After mowing, use a piece of wood
or plastic to remove adherent plant
remains from the wheels, ventilation
holes, ejection hole and blade area.
Do not use hard or pointed objects, as
these may damage the blade.
•
Oil the wheels from time to time.
•
Before each use, check the lawnmower
for obvious defects such as loose, worn
or damaged parts. Check that all nuts,
bolts and screws are sitting firmly.
•
Check the covers and protective de-
vices for damage and check that they
are sitting correctly. Replace them if
necessary.
If the blade is blunt, it can be sharpened
by a specialist workshop. If the blade is
21)
damaged or showing signs of imbalance,
it must be replaced.
1. Turn the equipment over.
2. Use sturdy gloves and hold the blade
firmly (22). Turn the blade screw (21)
Turn off the appliance and, before
doing any servicing, remove the
battery.
Do not hose down the lawnmow-
er with water. Electric shock
hazard.
Changing the Blade
Publicidad
