GreenWorks G48GTE30 Manual Del Operario página 7

1 Introduction............................ 4
1.1 Purpose...........................................4
1.2 Overview......................................... 4
2 General power tool
safety warnings......................4
3 Safety...................................... 4
4 Assembly................................ 4
4.1 Unpack the machine....................... 4
4.2 Attach the guard............................. 4
4.3 Attach the wheel............................. 5
4.4 Attach the auxiliary handle..............5
5 Operation................................ 5
5.1 Install the battery pack.................... 5
5.2 Remove the battery pack................ 5
5.3 Start the machine............................5
5.4 Stop the machine............................ 5
5.5 Operation tips..................................5
5.6 Cutting tips...................................... 5
5.7 Adjust the length of the
cutting line.......................................5
English
5.8 Line cut-off blade............................ 6
5.9 Adjust the length of the shaft.......... 6
5.10 Adjust the pivoting head................. 6
5.11 Change to the edging mode........... 6
6 Maintenance........................... 6
6.1 General information........................ 6
6.2 Clean the machine.......................... 6
6.3 Replace the spool........................... 7
6.4 Replace the cutting line.................. 7
7 Transportation and
storage.................................... 7
7.1 Move the machine.......................... 7
7.2 Store the machine...........................7
8 Troubleshooting.....................8
9 Technical data........................ 9
10 Warranty..................................9
11 EC Declaration of
conformity.............................. 9
3
EN