Publicidad
Idiomas disponibles
Idiomas disponibles
16.
Troubleshooting
If your Unipro is not working properly, please check the following:
Problem
Possible causes
No display
Flat battery
Damaged battery
Low battery
Low batteries
display
Controls will not
Keypad is locked
work
No sensation
Intensity is not strong
enough
Intensity setting
There is a connection
returns to 0mA.
error
open-circuit.
Faulty pads or lead
wires.
Intensity setting
This is a safety feature
won't increase
whilst using IFT mode
above 40mA
to prevent harm to the
user.
Solution
Charge battery. See section 12
Contact
maintenance or calibration other than
replacement of gel pads and battery
charging. Do not modify the device as
this may reduce safety or effectiveness.
Charge battery
If the lock icon is shown, press either of
the - buttons to unlock the device.
Increase the intensity until you feel a
strong but comfortable sensation.
Ensure the pads are correctly attached to
leading
to
an
your body and lead wire inserted to both
the pads and device.
Try using the other lead wire or electrode
pads. If problem occurs, it may be
necessary to purchase replacements.
To increase up to 60mA, press the phase
skip button. This disables the intensity
lock, allowing you to increase intensity.
supplier.
There
is
no
29
Publicidad
