Publicidad
Idiomas disponibles
Idiomas disponibles
Dimensions
Safety Classification
Software Version
Applied Part
Environmental Specifications
Operating Conditions
Storage Conditions
Note: The electrical specifications are nominal and subject to variation from the
listed values due to normal production tolerances of at least 5%.
Note: At least 30min required for the device to warm / cool from the minimum /
maximum storage temperature between uses until it is ready for intended use.
Symbols Table
TYPE BF APPLIED PART: Equipment providing a degree of protection against electric
shock, with isolated applied part. Indicates that this device has conductive contact
with the end user.
This symbol on the unit means "Refer to instructions for use".
Temperature Limitation: indicates the temperature limits to which the medical device
can be safely exposed.
Humidity Limitation: indicates the humidity limits to which the medical device can
be safely exposed.
Atmospheric Pressure: indicates the atmospheric limits to which the medical device
can be safely exposed.
Lot Number: indicates the manufacturer's batch code so that the batch or lot can
be identified.
125 x 62 x 28mm
Internal power source
Designed for continuous use
No special moisture protection
R3_00
Skin surface electrode pads
Temperature range: 5 to 40°C
Humidity: 15 to 90% RH non-condensing
Atmospheric pressure: 700 hPa to 1060 hPa
Temperature range: -10-+60°C (≤ 1 month)
-10-+45°C (≤ 3 month)
-10-+28°C (≤ 1 year)
Humidity: 15 to 75% RH non-condensing
Atmospheric pressure: 700 hPa to 1060 hPa
35
Publicidad
