cecotec bolero COOLMARKET TT 107 WHITE Manual De Instrucciones página 57

1. PARTS AND COMPONENTS
Fig. 1
1. Freezer compartment door
2. Thermostat knob
3. Refrigerator glass shelves
4. Crisper box cover
5. Crisper drawer
6. Adjustable feet
7. Door shelves
Note:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
To make the most out of the refrigerator in terms of energy, place all the shelves and drawers
in their original position, that is, as shown in Figure 1.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content:
- Bolero CoolMarket TT 107 White / Inox / Black refrigerator
- Instruction manual.
3. PLACE OF INSTALLATION
1. Conditions for proper ventilation
The location you choose for the installation of the refrigerator must be properly ventilated and
away from heat sources. Do not place the refrigerator near heat sources, like a cooker hob or
pot, and avoid direct sunlight to ensure the cooling effect and save on energy consumption.
Do not place the refrigerator in a damp place to avoid rust or loss of power. The result of
BOLERO COOLMARKET TT 107 WHITE / INOX / BLACK
ENGLISH
57