Publicidad
Idiomas disponibles
Idiomas disponibles
The hammer drill function must not
be used when the keyed chuck is
attached.
Electrical devices must not be dis-
posed of with domestic waste.
Symbol in case
Recess, Hammer Drill
Recess, Keyed chuck
Recess, Drill chuck key
Recess, Drill
Recess, Pointed chisel
Recess, Flat chisel
Recess, Depth stop
Recess, Key for housing cover
Recycling code
Symbol on grease
Caution!
Not suitable for children under
three years
Dispose of packaging in an envir-
onmentally friendly manner
Recycling symbol
Recycling code
Grease, tool
Not suitable for gearboxes
Symbols used in the instruction
manual
Caution!
General Power Tool Safety
Warnings
WARNING! Read all safety
warnings, instructions, illustra-
tions and specifications provided
with this power tool. Failure to follow
all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions
for future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
b) Do not operate power tools
in explosive atmospheres,
such as in the presence of flam-
mable liquids, gases or dust.
Power tools create sparks which may
ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify
the plug in any way. Do not
use any adapter plugs with
earthed (grounded) power
tools. Unmodified plugs and match-
ing outlets will reduce risk of electric
shock.
b) Avoid body contact with
earthed or grounded sur-
GB
MT
25
Publicidad
