Parkside PBH 1550 B2 Traduccion Del Manual De Instrucciones Originale página 35

Spare parts and accessories
You can get spare parts and accessories from www.grizzlytools.shop. If
you have any problems with your order, contact us via our online shop. If you have any
other questions, contact the Service Centre, p. 34
Pos. nr. Name
13 Keyed chuck
16 Additional handle
15 Drill chuck key
Troubleshooting
The following table will assist you in fixing faults:
Problem
Device does not start
Poor drilling performance
Device works with interrup-
tions
Possible cause
No mains power supply
On/Off switch (8) is broken
Worn out carbon brushes
Defective motor
Drill blunt
Internal loose contact
On/Off switch (8) is broken
GB
Order No.
91110401
91110400
91110406
Troubleshooting
Check the socket, mains con-
nection cable, plug and fuse
and have them repaired by a
qualified electrician if neces-
sary.
contact the service centre.
contact the service centre.
Change drill or grind if pos-
sible
contact the service centre.
MT
35