cecotec CECOFRY ADVANCE INOX DARK Manual De Instrucciones página 43

1. PARTS AND COMPONENTS
Fig. 1.
1. Control panel
2. Basket
3. Basket release button
4. Basket handle
5. Housing
6. Tray
7. Air outlet
8. Power cord
2. BEFORE USE
- Take the product out of the box.
- Check for any visible damage. If any is observed, contact as soon as possible the Technical
Support Service of Cecotec for advice or reparation.
- Clean the basket and container thoroughly with hot water, washing-up liquid and a
non-abrasive sponge.
- Clean the inside and the outside of the device with a damp cloth.
- Place the fryer on an even, heat-resistant surface.
- Place the basket in the container.
Fig. 2.
Warning
- Do not wet the heating element.
- Do not fill the device with oil or any other liquid.
- Do not place the device on any surface that it is not heat-resistant.
3. OPERATION
1. Plug the device into a power supply.
2. Take the container and the basket out from the device carefully.
Fig. 3.
3. Put the ingredients in the basket.
Fig. 4.
4. Slide the container back into the device by aligning it with the guides in the body of the
device.
Fig. 5.
5. Set the required preparation time for the ingredient.
ENGLISH
CECOFRY ADVANCE INOX
CECOFRY ADVANCE INOXDARK
43