cecotec BOLERO HEXA Manual De Instrucciones página 69

1. PARTS AND COMPONENTS
Fig. 1 Control panel
1. Cancel On/off
2. Timer/Child-
lock safety system
3. Delay end
4. Fast preheating
5. Oven function
6. Setting slider
7. Duration and
time setting
8. Temperature
settings
9. Light bulb on/
off
10. Start/pause
icon
Please note
The graphics in this manual are schematic representations and may not exactly match the
appliance.
In operating mode, the orange light stays on; in standby mode, the white light stays on*.
*The colour of the lights may vary depending on the oven model.
2. BEFORE USE
This appliance is packaged in a way as to protect it during transport. Take the device out
-
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
BOLERO HEXA SM406000 EDGE+ A+ / BOLERO HEXA SM406000 GLASS BLACK A+ / WHITE A+ / GREY A+
Press to cancel the current operating status and enter
standby mode.
To activate the timer/child lock function, press and hold
this icon for 3 seconds (approx.).
Press this icon to set the cooking end time.
Press this icon to pre-heat the oven quickly.
Press and hold this icon for 3 seconds to change the
heating mode.
Slide your fingertip over the setting slider to change the
values displayed on the screen.
Set a cooking duration time and then, select the function
and set the time in standby mode.
Press the icon to set the desired temperature.
Press this icon to switch on/off the light bulb.
Press this icon to start or pause cooking.
ENGLISH
69