cecotec BOLERO HEXA Manual De Instrucciones página 77

Cleaning agent
- With proper care and cleaning, your appliance will preserve its original aspect and operate
correctly for a long period of time. Next, you have some instructions on cleaning and care
of the product.
To avoid damage to different surfaces by using the wrong cleaning agent, please observe
-
the information in the table. Depending on the model, not all parts listed may be present
in your device.
Warning
Risk of damage to the surface, do not use: strong or abrasive cleaning agents, cleaning agents
with high alcohol content, hard scouring pads, or cleaning sponges, high-pressure or steam
cleaners or special cleaners for hot cleaning of the appliance.
Tip
Follow the manufacturer's instructions for cleaning and care products.
Outer surface - Cleaning
Outer surface of the
appliance. Stainless-
steel front part
Plastic
Coloured surfaces
Control panel
Door panels
BOLERO HEXA SM406000 EDGE+ A+ / BOLERO HEXA SM406000 GLASS BLACK A+ / WHITE A+ / GREY A+
Warm water with neutral soap:
Wipe it with a kitchen cloth and then dry it with a soft cloth.
Remove lime, grease, starch, and albumen stains immediately.
Corrosion may form under these stains.
Special stainless steel cleaning agents suitable for hot surfaces
are available from specialist shops. Apply a very thin layer of the
cleaning agent with a soft cloth.
Hot water with neutral soap:
Wipe it with a kitchen towel and then dry it with a soft cloth. Do not
use glass cleaner or a glass scraper.
Hot water with neutral soap:
Wipe them with a kitchen towel and then dry them with a soft
cloth.
Hot water with neutral soap:
Wipe it with a kitchen towel and then dry it with a soft cloth. Do not
use glass cleaner or a glass scraper.
Hot water with neutral soap:
Wipe it with a kitchen cloth and then dry it with a soft cloth.
Do not use a glass scraper or stainless-steel scouring pad.
ENGLISH
77