cecotec BOLERO HEXA Manual De Instrucciones página 71

During installation, use protective gloves to prevent cuts with sharp edges.
-
- Check the appliance for damage before installation, do not connect it to the mains if it is
damaged.
Before switching on the appliance, remove all packaging and adhesive film from the
-
product.
The plug must be accessible, or a switch must be incorporated in the fixed wiring, so that
-
the device can be disconnected from the supply after installation if necessary.
Caution: you should not install the appliance behind a decorative door to avoid overheating
-
the door.
Follow the dimensions (in milimiters) shown in figure 2 to install the oven.
-
4. OPERATION
Time adjustment
Before using the oven, you must set the time.
1. After connecting the oven to the mains, press the clock icon
using the setting slider.
2. Press the clock icon
3. Press the clock icon
Attention
The clock has a 24-hour display.
Heating modes
Heating modes
Conventional
Convection
ECO
Conventional +
Fan
BOLERO HEXA SM406000 EDGE+ A+ / BOLERO HEXA SM406000 GLASS BLACK A+ / WHITE A+ / GREY A+
again to adjust the minutes with the setting slider.
to end the setting.
Temperature
30~250 ℃
50~250 ℃
140~240 ℃
50~250 ℃
Use
For traditional single-height baking or
roasting. Especially suitable for cakes with
wet toppings.
For baking or roasting at one or more
heights. The heat is released evenly from
the heating ring around the fan.
Used to save energy during cooking.
For baking or roasting at one or more
heights. The fan distributes the heating
elements heat evenly in the interior.
ENGLISH
to set the current time
71