cecotec BOLERO HEXA Manual De Instrucciones página 82

ENGLISH
Push buttons do
not operate easily
The fan does not work continuously:
fan heating
After use, there is some noise and air
flow near the control panel
Food is not cooked enough on the
time indicated in the recipe
Uneven toasting
The light does not switch on
If none of these situations match your problem, do not attempt to disassemble, or repair
-
the appliance by yourself. Repairs carried out by unqualified persons may result in injury
or serious malfunctions. Contact the official Cecotec Technical Support Service. The repair
must be carried out by an authorised technician, and you must use only original spare
parts.
Unauthorised maintenance will affect the safe use of the product and the application of
-
the warranty policy.
Warning - risk of electric shock
Incorrect repairs can be dangerous. Refer only to authorised technical personnel for repairs
and replacement of damaged power cables. If the appliance is faulty, disconnect it from the
mains or switch off the earth leakage circuit breaker in your home. Contact the official Cecotec
Technical Support Service.
82
BOLERO HEXA SM406000 EDGE+ A+ / BOLERO HEXA SM406000 GLASS BLACK A+ / WHITE A+ / GREY A+
There is dirt or
grease
Carefully clean the control panel (see cleaning and
maintenance section).
This is normal due to better heat distribution and
the best possible oven performance.
The cooling fan is still active to prevent high
moisture conditions in the interior and to cool
down the oven for convenience. The cooling fan
will turn off automatically.
You are using a different temperature to the recipe
one. Check the temperature again. The amount of
ingredients is different to the recipe one. Check the
recipe again.
The temperature setting is too high, or it is not
placed on the correct level. Check the recipe and
settings again. The surface finish, colour and/
or material of the cookware used was not the
best option for the selected function. When using
radiation heat, as well as using the upper + lower
heating elements, use oven cookware with a matt
finish, dark in colour and light in weight.
The light bulb must be replaced.
The replacement of the light bulb must be carried
out by the official Cecotec Technical Support
Service or by a qualified technician.