Publicidad
Idiomas disponibles
Idiomas disponibles
JL-VWB6L(1330985) COMPRESSOR
APPLICATION
This piston compressor is designed exclusively for the generation of compressed air of
max. 10 bar.
This compressor can be used in various areas of application such as inflating car tyres
or with pneumatic tools such as nailers, staplers, pneumatic orbital sanders etc.
Depending on the application, the corresponding safety instructions for the connected
work tool should be followed. In such case, the required effective output or air flow rate
of the piston compressor should comply with the technical data.
It is not designed for commercial use.
WARNING ! For your own safety, before you start using the tool, please
read thoroughly this manual and the general safety instructions and make
sure that you are familiar with the operation of the tool. Always include this
instruction manual when you hand over the tool to third parties.
DESCRIPTION (FIG. 1)
1
Safety valve
2
Tank pressure gauge
3
Pressure regulator
4
Output pressure gauge
PACKAGE CONTENT LIST
1x compressor
1x instruction manual
UNPACK
Remove all packaging materials.
„
Remove remaining packing and package inserts (if included).
„
Check that the package contents are complete.
„
Check the appliance, the power cord, the power plug and all accessories for
„
transportation damage.
Keep the packing materials as long as possible till the end of the warranty period.
„
Dispose it into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
If any parts are missing or damaged, please contact your dealer.
USER MANUAL
5
Outlet
6
Fuse
7
Power switch
8
Drain valve
EN
61
Publicidad
