Publicidad
Idiomas disponibles
Idiomas disponibles
To stop the compressor
EN
1.
Push the ON/OFF power switch (7) to its "OFF" position.
2.
Press trigger on tool to relieve air pressure in hose. Disconnect hose from the
airoutlet.
3.
Relieve the air tank pressure and remove moisture by opening the tank drain
valve(8). Turn the valve slowly counterclockwise until the pressure is relieved.
Then,retighten the drain valve (8).
4.
Allow the air compressor to cool completely. Then store the unit in a clean, dry, safe
location out of reach of children.
PROPER USE
Attention! The air compressor may only be used indoors (in the house).
Only normal air may be compressed in this compressor. Apart from the
normal ambient air, it is prohibited to compress any other air types, such as
explosive air.
Improper use
This piston compressor is not suitable for continuous operation or unrestricted
„
commercial operation and may only be used in dry rooms.
The use in explosive environments as well as pointing the compressed air gun at
„
persons is prohibited.
Residual risk
Follow the corresponding maintenance and safety instructions as provided in this
instruction manual. Despite wearing protective equipment (protective goggles), dirt
particles, dust etc. can get into your eyes or face.
Always stay alert when working and keep other persons at a safe distance from your
workplace.
If the compressor and the compressed air line are damaged, contact your dealer for
repair.
If the compressor makes abnormal noises, switch it off immediately and contact a
dealer.
To protect against exposure to noise when operating the air compressor,
always wear corresponding protective equipment (hearing protection).
TECHNICAL DATA
MODEL
Nominal voltage
Input power
Idle speed
Max. operating pressure
Testing pressure
Tank
Lubrication type
Air flow rate (@ 6 bar)
Protection class
Weight
68
JL-VWB6L (1330985)
220-240 V~ 50-60 Hz
300W
4500 rpm
10 bar
15 bar
6 litres
Oil-free
17 L/min
IP20
8.5 kg
Publicidad
