NORAUTO JL-VWB6L Manual De Usuario página 64

EXPLANATION OF SYMBOLS
EN
The following symbols are used in this manual and/or on the tool:
Compliance with the relevant requirements of the EU Directive(s).
Carefully read through the instructions before using the tool.
Do not open the cock before the air hose is attached
Wear hearing protection.
Hazard due to high temperatures.
Risk of electric shock.
The tool may start without warning.
The crossed-out wheeled bin symbol indicates that the item should
be disposed of separately from household waste. The item should
be handed in for recycling in accordance with local environmental
regulations for waste disposal. By separating a marked item from
household waste, you will help reduce the volume of waste sent to
incinerators or land-fills and minimise any potential negative impact on
human health and the environment.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING Read all safety warnings and instructions. Failure to follow all the
warnings and instructions may result in electric shock, fire and/or serious
injury.
SAVE ALL THE WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term "power tool" in the warnings refers to your mains operated (corded) power
tool or battery operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
„
Do not operate power tools in explosive atmospheres, such as in the presence of
„
flammable liquids, gases or dust. Power tools create sparkswhich may ignite the
dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions
„
can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify the plug in anyway.
„
Do not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
„
62