Publicidad
Idiomas disponibles
Idiomas disponibles
•
Ensure the brakes are released before the chair is moved again.
•
Always ensure that the device is stationary and the brakes are applied when transferring to and from the device.
•
Do not lean out of the device.
•
Check the wheels bearings the brakes
•
In case of damaged, broken, worn or missing parts, contact the dealer.
MOUNTING & USE
After unpacking the box, first remove the plastic cable tie and the packaging bubble bag with scissors, in the meantime paying
attention to keep all the spare parts and accessories in the box from damage. If you conduct the assembling on the ground, first
lay a piece of paper or carpet on the ground to prevent scratching, also remembering to distinguish the spare and accessory
parts from the subassemblies, and then remove the inner carton to take out the parts and place them in good order. What's
contained in the box is as shown in Picture 1:
As shown in Picture 2 below, the tool kit in :
Picture
2
DMI-F-10_Annexe 2_Notice.13
Version 1.0 27/03/2023
Picture 1
A1: a 5mm Allen Wrench
A2: a 6mm Allen Wrench
A3: a Hexagonal-hole Spanner
1. Cloth basket Assembly
2. T-shape Handle Assembl
3. Frame Assembly
4. Tool kit
5. Eight-inch Wheel Assembly
6. Foldable Upper Bar Assembly
7. Knee Platform Assembly
8. Spare and Accessory Parts
11
Publicidad
