Publicidad
Idiomas disponibles
Idiomas disponibles
i.
Traveled distance: distance traveled in the last 24 hours of the vehicle for
all its drivers.
j.
Driver ID: the identification is nothing more than the record of the national
driver's license. Thus, in the inspection, the driver must present its driver's
license and information should be the same. In figure above the driver
(3) was the last to be identified and have led the vehicle in the last 24
hours and the driver
vehicle in the past 24 hours.
2.5.21 Operation information in diagram tape
The vehicle's operation information printed on the diagram tape is according to
next figure.
a.
Distance traveled according to the time printed on the diagram tape
(numerical).
b.
Driver identification: Indicates that the driver was identified according to the
printed time.
c.
Distance traveled according to the time printed on the diagram tape
(graphical - every rise and fall of the curve 10km were driven).
d.
Peak speed in minutes: It will be represented the highest speed reached
in minutes on the diagram tape. The second-to-second information can
only be viewed with the memory data download function. The represented
top speed is 150km/h.
e.
Print time: last 24 hours of vehicle operation.
f.
Power Failure: If a continuous line is viewed in this area means that the
vehicle has turned off the main battery of the vehicle. In some situations,
handling, the driver can be fined.
104
(1) was the first to be identified and have led the
© Continental Automotive
Issue 08/2023
Publicidad
