Publicidad
Idiomas disponibles
Idiomas disponibles
12
Keypad error
13
Date and time
adjustment warning
14
Over speed warning
16
USB upload error
17
Workshop temporarily
blocked
18
Printer Overheated
108
Some keypad is
Any button in Key
locked for more
Pad is not working.
than 3
consecutives
minutes.
Date and time
This warning
adjustment
appears when
performed by
there is a date and
user.
time adjustment in
BVDR.
The vehicle speed
A sound alarm will
is more than the
be emitted when
speed limit set in
vehicle moves over
BVDR or the K
the speed limit set
factor parameter
into the BVDR until
stored in BVDR is
the speed is below
not correct.
the limit.
The USB disk is
An error screen will
defective or full,
be displayed and
the USB input is
at the same time
defective BVDR.
data loading will be
interrupted.
Attempt to
This message
manipulate the
appears when
data of the
more than 3
BVDR
or error of
attempts to enter
access code or
the workshop code
workshop
have been
password.
unsuccessful.
Printer overheated
The BVDR cancels
due to several
the print job when
consecutive prints.
it detects the high
temperature.
© Continental Automotive
Press all buttons
alternately. If the error
persists, go to an
authorized VDO
station.
Verify the current hour
and date.
Slow down the vehicle
speed below the
speed limit or
recalibrate the BVDR.
Check the pendrive
space or change the
pendrive. Change to a
working USB disk, if
the error persists,
check the BVDR at the
authorized VDO
station.
This procedure should
be performed only by
an authorized VDO
station.
Wait a few minutes for
the printer to cool, and
try to print again. If the
error persists, go to an
authorized VDO
station.
Issue 08/2023
Publicidad
