Publicidad
Idiomas disponibles
Idiomas disponibles
04
Kitas speed sensor
error
05
K-Line communication
error
06
Print without paper roll
07
CAN communication
interface error
10
Printer drawer open
warning
11
Recording error
Issue 08/2023
The Kitas sensor
Error information
may be defective
will be sent via
or a bad
CAN, speed will
connection.
not be displayed in
vehicle dashboard.
It will be present in
active error list until
the issue is fixed.
Problems on the
No message will
dashboard of the
appear
vehicle or the
dashboard of the
electrical part.
vehicle.
There is no paper
If there is no paper
inserted in the
in the printer
printer tray or
drawer the BVDR
paper is not
will cancel the print
enough to
job and after 10
complete the
seconds it will
current print.
automatically go to
the Default
Display.
CAN
No message will
communication
appear on the
problems with the
dashboard of the
vehicle,
vehicle (CAN
unbalanced CAN
cluster).
network.
The drawer of
An audible alarm
BVDR is
sounds and a
maintained open
message appears
for more than 20
on the screen.
seconds.
BVDR's software
Any BVDR's
update error.
message will be
transmitted.
© Continental Automotive
Check the sensor and
its connection. In case
the error persists, go
to an authorized VDO
station.
Goes to an authorized
on
the
VDO station to repair
it.
Insert a new roll of the
VDO print ribbon.
Go to an authorized
VDO station to
perform the vehicle
CAN network check.
Close the BVDR
drawer.
In case of the error
persisting go to an
authorized VDO
station to repair.
Turn on and turn off
the vehicle, if the error
persists, go to an
authorized VDO
station.
107
Publicidad
