VDO BVDR 2.0 Manual De Instrucciones Del Usuario página 86

1.3
Main data in memory
Driver registration code
BVDR 2.0 is capable of entering only one driver code at a time. In the driver
menu, select the option "register driver code" and press the button
is the screen where you must enter the code you want and then the driver's
entitlement number. After entering the driver's entitlement, a confirmation
screen will appear. To confirm, click on the button
the registration, click on the button
Driver identification
Every driver, before starting his trip, must identify himself by selecting the
respective code through his NFC card or previously registered. For more
information, see item 2.6.3
Speed and distance traveled
The speed and distance information are stored in memory and can be verified
in the following ways:
•
Speed verification and total odometer on the main screen;
•
Making the printing of report in VDO paper;
•
Viewing the electronic file extracted from the BVDR 2.0.
Error log
When a serious failure or momentary error occurs, it will be recorded on the
BVDR 2.0 memory with the code, date and time of the failure.
Calibration parameters
Some parameters such as chassis of the vehicle, k-factor, vehicle plate and
speeding limit are metrologically controlled by INMETRO or other local
metrology agency and therefore are subject to periodic checks by competent
authorities.
86 © Continental Automotive
. Next
. If you want to cancel
Issue 08/2023