Publicidad
Idiomas disponibles
Idiomas disponibles
Speed sensor
The speed sensor is part of the BVDR 2.0 system. It provides the necessary
signal to recording distance and speed.
Printing in diagram tape
Print, when requested, the data report for the last 24 hours.
USB Drive for data extraction (USB 2.0, FAT32)
Through orientation of LCD display and using the navigation buttons, the user
can select the "USB file recording", which lets you save the information recorded
on the BVDR 2.0 in an external electronic memory.
The data are protected by encryption and cannot be viewed in any application,
requiring specific VDO On Board¹ application, subject to charges.
Software for viewing VDO On Board
VDO On Board is the fleet management solution from VDO based on BVDR.
Through this platform it is possible to issue reports, view vehicle real-time
location and also provide digital storage and secure information.
With the VDO On Board, its fleet gains efficiency and reduces costs with an
innovative and highly reliable technology.
See our website www.fleet.vdo.com.br for more information.
Telematics Device
In addition to downloading data made electronically through USB, the digital
tachograph also features integration with a telematics device (optional) to
perform the same function via radio frequency, or even the possibility of sending
and receiving data to the tachograph remotely.
Visit the VDO on the Internet to learn more about the services
offered with the BVDR information and VDO On Board
application.
www.fleet.vdo.com.br
¹
The VDO On Board platform is a fleet management service and is subject to a charge
84
Attention
BVDR digital tachograph operates at voltages from 12 volts
to 24 volts and may not be subject to lower voltages than 8
volts or greater than 32 volts. The printer operates between 9
and 32 volts.
© Continental Automotive
.
Issue 08/2023
Publicidad
