Motorola TLK 110 Manual De Instrucciones página 9

Chapter 2
Troubleshooting
2.1
Entering Maintenance Mode
Prerequisites: Turn off your radio.
Procedure:
Press and hold the PTT button and Talkgroup Scroll Rocker (CH-), and turn on your radio.
Your radio shows the following indications:
• The display shows boot animation.
• The display shows Maintenance.
2.2
Connecting to the Maintenance Mode Portal
Prerequisites: Ensure that your radio is in maintenance mode.
Procedure:
1 If you need to configure the Wi-Fi network or download logs, perform one of the following
actions:
Option
Connecting your radio
to the Maintenance
Mode Portal through a
USB cable
Connecting your radio
to the Maintenance
Mode Portal through
Wi-Fi
2 Open your preferred web browser.
3 In the address bar, enter https://192.168.100.1.
1
The XXXX represents the last four digits of your radio IMEI number.
Actions
Connect a USB cable between your radio and computer.
NOTE:
If you are using Windows 10, no drivers are required to
connect your radio to your computer.
Once connected, the computer shows your radio as
Remote NDIS Device under Network adapters.
a Connect your smart devices or computer to the TRS-XXXX
Wi-Fi network.
b For the Wi-Fi password, enter the last eight digits of your
radio serial number.
NOTE: The WAVE PTX Portal administrator can
change the default password.
MN009548A01-AA
Troubleshooting
1
9