cecotec BOLERO SQUAD I 3001 Manual De Instrucciones página 71

The induction hob or a
cooking area has turned
off unexpectedly, emits
a sound and an error
code is displayed
(usually alternating with
one or two digits on the
cooking timer display)
7. TROUBLESHOOTING
The induction hob is fitted with a self-diagnostic function. With this function, the technician
can check the operation of different components without de-installing the induction hob from
the worktop.
Error
Problem
code
Fault in the temperature sensor of
E1
the ceramic hob - open circuit.
Fault in the temperature sensor of
E2
the ceramic hob - short-circuit.
Fault in the temperature sensor of
Eb
the ceramic hob.
High temperature of the hob
E3
sensor.
Fault in the temperature sensor
of the insulated-gate bipolar
E4
transistor
- open circuit.
Fault in the temperature sensor
of the insulated-gate bipolar
E5
transistor
- short circuit.
Technical fault. Write down the letters
and numbers of the error,
disconnect the induction hob
from the mains and contact
the official Cecotec Customer
Service.
Possible solutions
Check the connection or substitute the
temperature sensor of the ceramic hob.
Wait for the hob temperature to return to
normal.
Press the Power button to restart the
product.
Replace the power board.
BOLERO SQUAD I 3001
ENGLISH
71