Coltene BioSonic UC150 Guía De Uso página 10

12.02.2016 10:21
SET DATE / TIME
04 NOV 2013
05 DEC 2014
06 JAN 2015
07 FEB 2016
08 MAR 2017
00 vector graphics: logo and buttons
09 APR 2018
10 MAY 2019
01-logo-loading
DD.MM.YYYY MM.DD.YY YYYY.MM.DD
02-logo-information
Figure 3 Setup Screen: Date and Time 04-A-button-program-light
04-B-button-program-light-feedback
• SETUP COMPLETE. The display will now show the main screen once setup is completed in the
05-A-button-program-regular
05-B-button-program-regular-feedback
language of your choice. Your BioSonic UC150 is now ready to use!
06-A-button-program-heavy
06-B-button-program-heavy-feedback
07-A-button-program-my
NOTE: If modifications need to be made to the setup of the unit, go to settings menu by pressing
07-B-button-program-my-feedback
11-A-button-settings
to change the setup options.
11-B-button-settings-feedback
08-A-button-log
08-B-button-log-feedback
6. Filling Instructions
• Ensure that the drain handle
Fill the unit with warm water to the fill line indicator
filled up to the minimum line and does not exceed the maximum line while using accessories
like beakers or baskets.
• Pour the required amount of ultrasonic cleaning solution (eg. BioSonic® General Purpose UC30,
BioSonic® Enzymatic Ultrasonic Cleaner UC32) and water into the tank. Note that some
solutions require the use of a beaker.
• Change the solution in the tank daily or sooner if it appears soiled or discolored. When beakers
are used, change the solution in the beaker after each use.
• Drain unit by fully rotating the drain handle clockwise to the "Open" position and allow the
solution to empty into sink or waste system. Rinse tank and fully rotate the drain handle
counter-clockwise to the "Closed" position. Never drain tank by manually discarding solution as
this may cause the unit to stop working properly.
NOTE: Never operate the unit without solution. Operating a dry tank will void the warranty.
Do not place objects directly on bottom of tank. Always use a cassette basket or beakers.
*see last page for figures
10
40°C
08 59
09 00
10 01
AM
11 02
12 03 PM
01 04
02 05
12Hr 24Hr
(Figure 5*) is fully rotated counter-clockwise to the closed position.
00 vector graphics: single-icons and screen buttons
• SET THE DATE AND TIME: Set the date and
time with the preferred format by using the
30-settings
drop down list and format buttons. Press
to accept. User can choose one of the three
31-temperature-large
date formats:
32-temperature-medium
- DD.MM.YY
33-temperature-small
03-product-name
- MM/DD/YY
34-program-light
- YY-MM-DD
09-1-A-button-heater- rst
35-program-regular
09-2-A-button-heater-after-code
09-B-button-heater-feedback
36-program-heavy
10-A-button-solution-degas
10-B-button-solution-degas-feedback
37-program-my
12-A-button-language-measurest
12-B-button-language-measures-feedback
38-timer-medium
13-A-button-date-time
39-timer-large
13-B-button-date-time-feedback
14-A-button-my-setup
40-solution
14-B-button-my-setup-feedback
41-degas
15-A-button-information
15-B-button-information-feedback
hot surface
16-A-button-degas
16-B-button-degas-feedback
CB
M 1:1
20.10.2016
(Figure 6*). Ensure that the water level is
42-log
43-information
44-close-lid
45-lid-is-open
46-lid-was-open
47-repair
48-software-update
50-A-button-standby
50-B-button-standby-feedback
51-statusbar-standby-closed
52-statusbar-standby-opened
60-attention
61-instructions
62-A-button-ok
CB
62-B-button-ok-feedback
M 1:1
25.10.2016
warning/caution