Coltene BioSonic UC150 Guía De Uso página 9

• Tape the enclosed template down to the counter top in the desired location. Make sure that the
"front of the unit" is closest to the user.
• Cut along the "cut line" for the counter top with a jigsaw or other reciprocating saw.
• Clean away dirt or sawdust around the opening and remove scrap wood.
• Attach the rubber gasket on the housing for better seating between bezel and counter top.
• Lower unit into opening. Be sure that the printed BioSonic logo on the housing faces the user.
(Figure 11*)
• The hose supplied with the BioSonic UC150 will allow you to dispose of the waste in accordance
with your local, state and/or federal regulations.
• Opening the drain valve will allow you to empty the solution into a waste storage container for
disposal in accordance with your local, state and/or federal regulations.
WARNING!
(Failure to
comply may
s result in
personnel injury
and/or
equipment
damage.)
Power up Settings:
SET LANGUAGE / MEASURES
English
Español
Deutsch
Italiano
Français
Figure 2 Setup Screen: Language and Measures
*see last page for figures
Power should not be supplied to the unit until all interconnections between
the display and tank enclosure and any accessories are securely connected.
This unit must be properly grounded. Failure to properly ground unit may
result in serious injury.
°C °F
00 vector graphics: single-icons and screen buttons
• SELECT A LANGUAGE AND TEMPERATURE
UNIT: Select the language for your appropriate
30-settings
region from the drop down list. Press
button to accept.
31-temperature-large
32-temperature-medium
33-temperature-small
34-program-light
35-program-regular
36-program-heavy
37-program-my
38-timer-medium
39-timer-large
40-solution
42-log
43-information
44-close-lid
45-lid-is-open
46-lid-was-open
47-repair
48-software-update
50-A-button-standby
50-B-button-standby-feedback
51-statusbar-standby-closed
52-statusbar-standby-opened
9
60-attention