Coltene BioSonic UC150 Guía De Uso página 11

7. Degassing
Degassing the solution eliminates large air bubbles that interfere with the cleaning process and is
necessary each time new solution is added to the tank.
NOTE: Be careful not to introduce unwanted gases into the liquid. Do not pump/pour the
00 vector graphics: logo and buttons
solution too quickly into the bath, insert/remove the product being cleaned into the bath too
rapidly, or move product while in the bath. Doing so will re-introduce gas into the solution and
01-logo-loading
require a longer degas cycle.
02-logo-information
00 vector graphics: single-icons and screen buttons
• PRESS THE DEGAS icon on
04-A-button-program-light
04-B-button-program-light-feedback
• Select the type of solution to log solution used or degas only and press
05-A-button-program-regular
30-settings
05-B-button-program-regular-feedback
• The BioSonic UC150 will begin to cycle on and off during the degassing process. The timer will
31-temperature-large
06-A-button-program-heavy
count down from five minutes.
06-B-button-program-heavy-feedback
32-temperature-medium
• DEGAS COMPLETE! Once the timer reaches zero, the words "Degas Complete" will be displayed.
07-A-button-program-my
07-B-button-program-my-feedback
33-temperature-small
Your solution is now ready for use. Press
11-A-button-settings
11-B-button-settings-feedback
34-program-light
08-A-button-log
8. Operation Instructions
35-program-regular
08-B-button-log-feedback
36-program-heavy
ector graphics: single-icons and screen buttons
Mode Selection
37-program-my
• Four modes are available to choose from on the main screen - 3 Preset modes: ECO: for light
38-timer-medium
30-settings
load time; REGULAR: for medium load time; STRONG: for heavy load time and "MY" mode for
39-timer-large
31-temperature-large
customized operation.
40-solution
32-temperature-medium
41-degas
33-temperature-small
• 'MY' mode: For custom mode settings, select 00 vector graphics: single-icons and screen buttons
34-program-light
hot surface
temperature and cleaning time. Ensure that HEATER function is ON if heating is desired
30-settings
(Applicable only to models with heaters). Press
35-program-regular
31-temperature-large
36-program-heavy
• Select mode by pressing appropriate icon for your particular load. Ensure that the lid is closed
32-temperature-medium
37-program-my
d screen buttons
before and during operation. Press
33-temperature-small
38-timer-medium
UC150 will continue to clean as the timer counts down the remaining time from the user-
34-program-light
39-timer-large
42-log
selected cleaning time.
35-program-regular
43-information
40-solution
e
36-program-heavy
44-close-lid
41-degas
ium
• Once the timer reaches zero, "Program Successful" will be displayed on the screen until any
37-program-my 45-lid-is-open
l
hot surface
button is pressed. Press
38-timer-medium
46-lid-was-open
39-timer-large
47-repair
NOTE: The cleaning cycle can be stopped at any time by pressing start or pause. Press
40-solution
48-software-update
return to the main screen.
41-degas
50-A-button-standby
50-B-button-standby-feedback
hot surface
51-statusbar-standby-closed
52-statusbar-standby-opened
*see last page for figures
60-attention
61-instructions
62-A-button-ok
03-product-name
09-1-A-button-heater- rst
00 vector graphics: single-icons and screen buttons
09-2-A-button-heater-after-code
09-B-button-heater-feedback
the main screen.
10-A-button-solution-degas
10-B-button-solution-degas-feedback
30-settings
12-A-button-language-measurest
42-log
12-B-button-language-measures-feedback
31-temperature-large
43-information
13-A-button-date-time
32-temperature-medium
13-B-button-date-time-feedback
44-close-lid
33-temperature-small
14-A-button-my-setup
14-B-button-my-setup-feedback
45-lid-is-open
34-program-light
15-A-button-information
00 vector graphics: logo and buttons
46-lid-was-open
15-B-button-information-feedback
35-program-regular
16-A-button-degas
47-repair
00 vector graphics: single-icons and screen buttons
16-B-button-degas-feedback
01-logo-loading
36-program-heavy
48-software-update
02-logo-information
37-program-my
50-A-button-standby
30-settings
50-B-button-standby-feedback
38-timer-medium
04-A-button-program-light
31-temperature-large
51-statusbar-standby-closed
04-B-button-program-light-feedback
42-log
39-timer-large
52-statusbar-standby-opened
32-temperature-medium
05-A-button-program-regular
43-information
40-solution
60-attention 05-B-button-program-regular-feedback
(Figure 12*)
33-temperature-small
61-instructions
44-close-lid
06-A-button-program-heavy
41-degas
34-program-light
06-B-button-program-heavy-feedback
62-A-button-ok
45-lid-is-open
62-B-button-ok-feedback
07-A-button-program-my hot surface
35-program-regular
07-B-button-program-my-feedback
46-lid-was-open
warning/caution
11-A-button-settings
36-program-heavy
11-B-button-settings-feedback
42-log
47-repair
08-A-button-log
37-program-my
43-information
08-B-button-log-feedback
48-software-update
44-close-lid
38-timer-medium
50-A-button-standby
50-B-button-standby-feedback
39-timer-large
45-lid-is-open
51-statusbar-standby-closed
40-solution
52-statusbar-standby-opened
46-lid-was-open
20-A-button-checked
60-attention 41-degas
47-repair
20-B-button-checked-feedback
61-instructions
48-software-update
hot surface
21-A-button-save
62-A-button-ok
21-B-button-save-feedback
62-B-button-ok-feedback
50-A-button-standby
50-B-button-standby-feedback
to return to the main screen or to abort the process. 22-A-button-home
warning/caution
22-B-button-home-feedback
51-statusbar-standby-closed
52-statusbar-standby-opened
23-A-button-back
60-attention
23-B-button-back-feedback
61-instructions
24-A-button-download
62-A-button-ok
24-B-button-download-feedback
62-B-button-ok-feedback
25-A-button-play
warning/caution
25-B-button-play-feedback
26-A-button-pause
26-B-button-pause-feedback
42-log
20-A-button-checked
43-information
20-B-button-checked-feedback
44-close-lid
21-A-button-save
21-B-button-save-feedback
45-lid-is-open
to return to the main screen. 22-A-button-home
46-lid-was-open
22-B-button-home-feedback
47-repair
23-A-button-back
48-software-update
23-B-button-back-feedback
CB
M 1:1
20.10.2016
50-A-button-standby
24-A-button-download
50-B-button-standby-feedback
24-B-button-download-feedback
42-log
51-statusbar-standby-closed
43-information
25-A-button-play
52-statusbar-standby-opened
25-B-button-play-feedback
20-A-button-checked
44-close-lid
60-attention
20-B-button-checked-feedback
26-A-button-pause
61-instructions
45-lid-is-open
26-B-button-pause-feedback
21-A-button-save
62-A-button-ok
21-B-button-save-feedback
46-lid-was-open
62-B-button-ok-feedback
from settings menu. Set the desired
22-A-button-home
47-repair
warning/caution
22-B-button-home-feedback
48-software-update
23-A-button-back
20-A-button-checked
to accept.
50-A-button-standby
23-B-button-back-feedback
20-B-button-checked-feedback
50-B-button-standby-feedback
24-A-button-download
21-A-button-save
51-statusbar-standby-closed
24-B-button-download-feedback
21-B-button-save-feedback
52-statusbar-standby-opened
to start cleaning cycle. Press 25-A-button-play
60-attention
22-A-button-home
25-B-button-play-feedback
22-B-button-home-feedback
61-instructions
00 vector graphics: single-icons and screen buttons
26-A-button-pause
62-A-button-ok
23-A-button-back
26-B-button-pause-feedback
62-B-button-ok-feedback
23-B-button-back-feedback
warning/caution
24-A-button-download
30-settings
24-B-button-download-feedback
31-temperature-large
20.10.2016
25-A-button-play
25-B-button-play-feedback
32-temperature-medium
33-temperature-small
26-A-button-pause
26-B-button-pause-feedback
34-program-light
35-program-regular
36-program-heavy
37-program-my
38-timer-medium
39-timer-large
to degas.
03-product-name
09-1-A-button-heater- rst
09-2-A-button-heater-after-code
20-A-button-checked
09-B-button-heater-feedback
20-B-button-checked-feedback
10-A-button-solution-degas
10-B-button-solution-degas-feedback
21-A-button-save
21-B-button-save-feedback
12-A-button-language-measurest
12-B-button-language-measures-feedback
22-A-button-home
13-A-button-date-time
22-B-button-home-feedback
13-B-button-date-time-feedback
14-A-button-my-setup 23-A-button-back
CB
14-B-button-my-setup-feedback
M 1:1
23-B-button-back-feedback
20.10.2016
15-A-button-information
24-A-button-download
15-B-button-information-feedback
24-B-button-download-feedback
16-A-button-degas
16-B-button-degas-feedback
CB
25-A-button-play
M 1:1
20.10.2016
25-B-button-play-feedback
to pause. The BioSonic 26-A-button-pause
26-B-button-pause-feedback
42-log
CB
43-information
M 1:1
44-close-lid
45-lid-is-open
46-lid-was-open
47-repair
CB
M 1:1
48-software-update
20.10.2016
50-A-button-standby
50-B-button-standby-feedback
51-statusbar-standby-closed
52-statusbar-standby-opened
20-A-button-checked
20-B-button-checked-feedback
21-A-button-save
21-B-button-save-feedback
22-A-button-home
22-B-button-home-feedback
23-A-button-back
23-B-button-back-feedback
24-A-button-download
24-B-button-download-feedback
25-A-button-play
25-B-button-play-feedback
26-A-button-pause
26-B-button-pause-feedback
CB
M 1:1
20.10.2016
CB
M 1:1
20.10.2016
20-A
20-B
21-A
21-B
to 22-A
22-B
23-A
23-B
24-A
24-B
25-A
25-B
11
26-A