Safety Devices
Safety devices serve for the protection
of the user and must not be put out of
operation or bypassed with respect to
their function.
Pressure switch
If the pulling lever on the trigger gun is
released the pressure switch turns off
the pump, the high-pressure jet is
stopped. If the pulling lever is pulled
the pump is turned on again.
Environmental protection
The packaging material can
be recycled. Please do not
throw the packaging material
into household waste;
please send it for recycling.
Old appliances contain valu-
able materials that can be re-
cycled; these should be sent
for recycling. Batteries, oil,
and similar substances must
not enter the environment.
Please dispose of your old
appliances using appropriate
collection systems.
Electrical and electronic devices often
contain components which could po-
tentially pose a danger to human
health and the environment if handled
or disposed of incorrectly. However,
these components are necessary for
the proper operation of the device. De-
vices marked with this symbol must not
be disposed of with regular household
rubbish.
Notes
about
(REACH)
You will find current information about
the ingredients at:
www.kaercher.com/REACH
the
ingredients
Before Startup
Attaching the Accessories
Attach the wheel caps.
Note: The EASY!Lock system joins
components with a quick-fasten thread
solidly and securely with just one turn.
1.
Mount the nozzle on the spray
lance (marking on the adjustment
ring at the top) and hand-tighten it
(EASY!Lock).
Join the spray lance with the trigger
gun and tighten until hand-tight
(EASY!Lock).
Release the unlocking device of the
push handle.
Pull the push handle out to its end
position.
Join the high-pressure hose with
trigger gun and high-pressure con-
nection of the appliance and tighten
until hand-tight (EASY!Lock).
WARNING
Risk of injury! Appliance, accessories,
supply lines and connections must be
in fault-free condition. If they are not in
a perfect state then the appliance must
not be used.
– 6
EN
2.
Start up
9