Ism Data - Mettler Toledo SevenCompact S220 Instrucciones De Manejo

Ocultar thumbs Ver también para SevenCompact S220:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Transfer
1
Press Select.
A list of calibrated sensor IDs appears.
2
Select a sensor ID from the list.
The calibration data of the selected sensor ID is transferred to a printer or PC.
Delete
1
Press Select.
A list of sensor IDs appears.
2
Select a sensor ID from the list.
3
Press Yes when the message "Selected data will be deleted. Please confirm" appears.
— or —
4
Press Exit to cancel.
After deletion, the sensor ID disappears from the list in the sensor ID menu.
An active sensor ID cannot be deleted.
This menu is protected by a deletion PIN code. Upon delivery, the PIN code is set to 000000.
Change the PIN code to prevent unauthorized access.
Export to USB-stick
Stored calibration data per sensor ID can be transferred to a USB-stick.
1
Press Select.
2
Select a sensor ID from the list.
3
Press Transfer to export the calibration data of the selected sensor ID to the USB-stick.
7.4  I SM data
SevenCompact meter incorporates Intelligent Sensor Management (ISM
nious functionality provides extra security, safety and eliminates mistakes. The most important fea-
tures are:
Extra security!
After connecting the ISM
and serial number are transferred from the sensor chip to the meter. The data is also printed
on the GLP printout.
After calibration of the ISM
to the sensor chip. The most recent data is always stored where it should be – on the sensor
chip!
Extra safety!
After connecting the ISM
These can be reviewed to see the development of the sensor over time. This information provides
an indication if the sensor should be cleaned or renewed.
Eliminate mistakes!
After connecting an ISM
ments.
Additional features are described below.
36 Data management
sensor, the sensor is automatically recognized and the sensor ID
®
sensor, the calibration data is automatically stored from the meter
®
sensor, the five most recent calibrations are transferred to the meter.
®
sensor, the last set of calibration data is automatically used for mea s ure-
®
) technology. This inge-
®

Publicidad

Tabla de contenido
loading

Tabla de contenido