Publicidad
Idiomas disponibles
Idiomas disponibles
LEVEL RANGE
COFDM:
QAM:
QPSK:
IMPEDANCE
MEASUREMENTS
COFDM:
Parameters:
Presentation:
QAM:
Parameters:
Presentation:
QPSK:
Parameters:
Presentation:
WRONG PACKETS
DCI FUNCTION
COFDM SIGNAL PARAMETERS
Carriers
Guard Interval
Code Rate
Modulation
Spectral inversion
Hierarchy
FEC
Page 6
45 dBµV to 100 dBµV.
45 dBµV to 110 dBµV.
44 dBµV to 114 dBµV.
75 Ω
BER after Viterbi.
CSI (Channel Status Information). Qualitative
measurement about channel quality. Measures
from 0 to 100 %. 0 % value corresponds to
maximum quality.
Numeric and level bar.
BER before FEC (Forward Error Correction).
MER (Modulation Error Ratio).
Numeric and level bar.
BER before Viterbi.
BER after Viterbi.
Numeric and level bar.
Number of non-correctable packets accumulated
during the measurement time, and indicates when
the fault was produced.
Identification according to levels 1.1, 1.2, 1.3 and
2.1 of TR 101 290 ETSI standard.
DVB channel identifier. Provides information on the
channel whose BER is being measured.
2k / 8k (Selected by the user).
1/4, 1/8, 1/16, 1/32 (Selected by the user).
1/2, 2/3, 3/4, 5/6, 7/8.
QPSK, 16-QAM, 64-QAM.
Selectable: ON, OFF.
Indicates hierarchy mode.
Reed-Solomon (204, 188) and Viterbi.
USER'S MANUAL. PROLINK-4
02/2003
Publicidad
