Figure 22.- Tuning a digital channel with acceptable BER level.
For decoding any service there are two possible procedures:
1)
Go to the service list, option service list from functions menu in digital mode.
Figure 23.- Selecting the service list function (SERVICE LIST).
If the service table not has been totally acquired yet, they will show differents
waiting messages (see figure 25). When it is available, will be showed all the services
contained in SDT table, along with information about the service type, and with an
asterisk ( * ) in case that the operator indicates one service partial or totally encrypted. If
it appears in green colour it means that the identified service is not available, therefore it
does not have audio nor video.
DTV
DR
DAT
MOS
-
Page 54
Digital television service
Digital radio sound service
Data broadcast service
Mosaic service
Type defined as reserved form by Provider
Table 3.- Information about service type.
USER'S MANUAL. PROLINK-4
02/2003