Publicidad
Idiomas disponibles
Idiomas disponibles
USER'S MANUAL. PROLINK-4
4.9.1.1.2
Selecting TV Mode: TV, LV, SY (TV MODE)
In addition to operating as a television set, the monitor of the PROLINK-4 can
act as an analogue level indicator, and can display the line synchronising pulse just as it
would appear on a screen of an oscilloscope.
To change the TV mode press key
appear:
Turn the rotary selector [4] to choose the information you want to be displayed
on-screen. Press the rotary selector [4] or key
mode.
The operation modes available are:
Monitor operating as a conventional television set.
TV:
TV+LV:
Monitor operating as a conventional television set, with a level
indicator on the upper part of the screen (the analogue bar).
TV+LV+SY: Monitor operating as a conventional television set, with a level
indicator and the line synchronizing pulse displayed on the
screen.
LV:
Signal level indication on the upper part of the screen (analogue
bar).
Operation in TV+LV+SY Mode
This function permits to display the line synchronising pulse corresponding to a
tuned signal on the monitor.
02/2003
Figure 6.- TV mode selection.
[23], and the following screen will
[23] to activate the selected display
Page 33
Publicidad
