Publicidad
Idiomas disponibles
Idiomas disponibles
USER'S MANUAL. PROLINK-4
DiSEqC screen is divided in 3 areas: the field to edit the DiSEqC commands
sequence (only command Sat A/B in previous figure), Send/Clear functions and Exit.
Fill in the LABEL field with the program name: turn the selector to display the
different characters in alphanumerical order and press to pick the character you need.
To define the DiSEqC commands sequence press key
until cursor is positioned on one line of the commands sequence (the line will blink). If
cursor has been placed on the first empty line, Sat A/B command will appear (first
DiSEqC command of table 4). To select a different command turn the rotary selector
until the desired command appears and then press it.
Some DiSEqC commands need to define an associated parameter (i.e. On/Off,
a numerical value, A/B...), when any of these commands is selected first option for the
associated parameter appears automatically at its right, to change it turn the rotary
selector and to validate it press the rotary selector (see DiSEqC commands table).
Once the DiSEqC command is defined, the cursor will pass to the following line,
if you want to define a new command proceed as for the first one, if you do not want to
add any command press key
After the commands sequence is created it is possible to modify it. To modify
the sequence press key
the command you want to make the change and then press the rotary selector [4]:
Insert function will appear on the screen, by turning the rotary selector it is possible to
select Delete and Edit functions. Once the desired function appears on the screen
(Insert, Delete or Edit) press the rotary selector. If you select Delete function the
command will be removed from the sequence, if you select Insert or Edit functions, you
must define the new command as previously described.
02/2003
Figure 38.- DiSEqC commands screen.
[31].
[31] repeatedly until you have positioned the cursor on
[31] repeatedly
Page 73
Publicidad
