Publicidad
Idiomas disponibles
Idiomas disponibles
USER'S MANUAL. PROLINK-4
Figure 44.- STORE screen, storing a measuring configuration.
5.
Finally, press
be stored. If any other key is pressed, an error will be indicated and the memory
will not be updated.
4.12.2 Retrieving a Configuration (RECALL)
Press the
shows the different parameters of each measuring configuration stored. Turning the
rotary selector [4] select the configuration to be retrieved (a number between 1 and 99).
Pressing the
[25] key again or the rotary selector [4] will retrieve the configuration.
Figure 45.- RECALL screen, retrieving a measurement configuration.
02/2003
[25] key or the rotary selector [4] and the configuration will
[25] key. The screen RECALL will appear on the monitor which
Page 87
Publicidad
